Tools/Maintenance

Refill pack for the Park Tool TPT-1 Tubeless Plug Tire Tool and other similar tools. These vulcanized rubber plugs are used to temporarily repair punctures in tubeless bicycle tire systems. Set of 5. NOTE: Intended for tubeless bicycle tires using sealant only. Not compatible with inner tube systems.

- For adjustment of spoke tension - Compatible with 9 - 15 gauge spoke nipples

Rock-N-Roll Absolute Dry lubricant is a super-clean chain lube that picks up little or no dirt. - For road bikes only

• Precision-sized, hardened-steel, chrome-plated spoke wrench • Deep U-channels for a great grip • 8-groove design fits 9/10/11/12/13/14/15 gauge spokes/nipples • Made in Taiwan

Tri-Flow Superior Lubricant is a light viscosity lube that allows for deep penetration into hard to reach moving parts. - Ideal for all conditions - wet, dry, road and trail - High grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475F) and humidity

High-performance brake and clutch fluid designed to lubricate and protect critical brake system componentry while providing reliable stopping power. Anti-vapor lock formulation maintains responsiveness and performance by fighting both water contamination and vaporization. Advanced chemistry resists corrosion, and oxidation and is compatible with SBR, EPDM, and natural rubbers. Exceeds the requirements of US FMVSS 116 DOT 5.1, DOT 3 & DOT 4, SAE J1703, SAE J1704, and ISO 4925 (Classes 3, 4 and 5.1). For use in all hydraulic clutch systems and all brake systems specifying DOT 5.1 brake fluids. Do not use in DOT 5 silicone brake systems or mix with silicone-based fluids. Features: - For use in all vehicles specifying DOT 5.1 brake fluid. - Durable and reliable stopping power. - Anti-vapor lock formulation maintains a responsive lever and pedal feel. - Resists corrosion, oxidation, and boil-off. - Mixes with other DOT 3, DOT 4, and DOT 5.1 brake fluids. - Exceeds US FMVSS 116 DOT 5.1, DOT 3 & DOT 4, SAE J1703, J1704 and ISO 4925 (Classes 3, 4 and 5.1).

Rock-N-Roll Gold lubricant is for both mountain and road bike use. The formulation goes deep down into the chain and traps any dirt. Then, with the energy of the chain freewheeling backwards, the dirt and grit floats to the surface so you can wipe it all off, leaving a new and clean application of lube inside the chain, where it's needed. - All-purpose lube - Cleans and lubricates simultaneously

• RockShox Dynamic Seal Grease (PTFE) • Recommended for rear shock service

Removes Presta and Schrader valve cores. CNC machined, anodized finish with laser-etched logo. Fits between spokes for quick and easy core removal. Features knurled end for a no-slip grip.

Finish Line's DOT 5.1 Brake Fluid is a high-quality fluid for maximum life and braking power. It exceeds the most stringent 5.1 specs and is compatible/mixable with all DOT 3, 4 or 5.1 spec'd systems. It also features a super-low viscosity to yield superior lever response and pad retraction. Plus, it won't foam up even on long, challenging downhills.

Finish Line's Mineral Oil Brake Fluid is high quality to provide maximum fluid life and braking power. It features a super-low viscosity to yield superior lever response and pad retraction. Plus, it won't foam up even on long, challenging downhills.

Finish Line's Premium Grease With Teflon is a race-proven lubricant formulated for the unique demands of bicycle bearings. It's exceptionally strong and thick, it doesn't separate and it repels water even when submerged. Rated "5 Chainrings, Exceptional Grease" by Bicycling Magazine, it's very slick and very tough and lasts as much as 5 times longer than petroleum grease.

Developed in collaboration with a premium OEM component manufacturer. Maxima Mineral Brake Oil is designed to ensure fast and safe brake response at the most critical moments. A mineral-based formula does not damage painted surfaces or carbon fiber. Low maintenance formula does not absorb moisture like DOT fluids, delivering a high boil point and minimizing the frequency of system bleeds. Zero-fade performance provides the ultimate braking control under power. For use in mineral-based brake and hydraulic systems specifying mineral oils. Features: - Consistent lever feel. - Low maintenance. - Lubricates and conditions seals. - Minimizes system bleeding. - OEM green coloring. - Maintains High boiling point.

Heat-treated alloy tool steel, one inch base fits wrench or bench vise. Thin-wall construction allows use without removal of cones and locknuts. The FR-5 has 12 splines that are approximately 23.4mm across. - Fits Shimano, SRAM, Sunrace, Suntour, Chris King and other cassette lockrings - Fits the SRAM XX1 11-speed cassettes - Also fits Shimano disc brake lockrings - Always use a quick-release skewer to hold the tool in place and snug to cogs when loosening; for solid axles, use the axle nut

The Park FR-4 Freewheel Remover fits Atom, Regina, splined Zeus and some Schwinn-approved freewheels. It's built thin so that removing axle parts is unnecessary. And, it's constructed of durable heat-treated steel.

12 splines, 22.6mm diameter fits Shimano, Sachs Aris, Sun Race, DNP Epoch, and other 5–10 speed freewheels. The FR-1.3 includes an enlarged thru-hole to accommodate 14mm axles.

Park's PolyLube is specifically formulated to protect bearing components. Its Polyurea grease has extremely high shear strength to protect bottom brackets, headsets, pedals and hubs. Use it on threads, seatposts, stems and cables, too. It's also safe for fork seals, and repels water.

White Lightning's Epic Ride lets you take on that all day ride and hear only the birds chirping, not your chain squealing. Its unique formula features premium non-petroleum synthetics that provide unheard of durability without the grimey build-up common with synthetic oils. This versatile lube also works wonders on derailleur cables and suspension seals. And, good news for the forgetful amongst us, Epic Ride is lube-and-go, no prep or dry time required!

Rain, sleet, hail, snow, no matter what form it comes in, water can reek havoc on your drivetrain. Fortunately, White Lightning's Wet Ride is designed to meet the demands of riders who traverse soggy terrain and ultra-long distances. This heavy bodied lube is made of premium synthetic oils and water-repelling polymers so it's 100% waterproof and unwaveringly durable. Dirt loving riders will appreciate how well it counteracts the effects of mud and every cyclist will appreciate the anti-corrosion additives that even protect during wet, winter commuting.

Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. The FR-5.2G has 12 splines that are approximately 23.4mm across. - Fits Shimano, SRAM, SunRace, SunTour, Chris King and other cassette lockrings - Fits the SRAM XX1 11-speed cassettes - Also Fits Shimano disc brake lockrings - Guide pin stabilizes tool

Park's Hex Wrench Set offers all the popular Allen wrenches (1.5, 2, 2.5, 3, 4, 5 and 6mm) in a convenient fold-up unit. The tool tips are chamfered for a positive grip and the one-piece fiber-reinforced-resin handle is light, comfortable, slip resistant and 40% stronger than steel.

- Makes your bike shine like new and keeps it that way. - Biodegradable formula cleans, polishes, and protects in one step. - Also great for dropper posts, suspension, and for seating tire beads. The original bike polish, Bike Lust's proprietary silicone-based formula includes a biodegradable cleaning agent. Bike lust goes on wet, quickly cleaning light dirt and grime as it polishes, and then dries to a beautiful protective coating. Works on any surface or material in one simple step making your bike look like new and future cleaning easier! Also great for dropper posts, suspension, and for seating tire beads. Bike Lust can be used on all types of materials and finishes including carbon fiber and matte finishes. It's also fantastic on tires to help shed mud and dirt as you ride.

Park's Pin Spanners are designed for maximum usefulness and versatility at the best value. Tough high-carbon tool steel is used to ensure long life and the handles are vinyl coated for a great grip and color-coded for easy identification. The green-handled SPA-1 is used to turn the adjustable bottom-bracket cup found on most 3-piece cranksets.

Park's Valve Core Tool is great for tightening, removing and installing Schrader and Presta valve cores (the cores are inside the valve), and also Presta valve extenders that have 5mm wrench flats. It's a handy tool to save a tube when all that's wrong is a broken valve, and it also lets you remove valves to easily insert sealant.

- 9 function multi tool - Hex keys: 2/2.5/3/4/5/6/8mm - Flathead and Phillips screwdrivers

Tri-Flow Superior Lubricant is a light viscosity lube that allows for deep penetration into hard to reach moving parts. - Ideal for all conditions - wet, dry, road and trail - High grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475F) and humidity

Y-Style Hex Wrench - Perfect for common hex hardware found on modern bicycles and components. - New improved ergonomic Y-style handle design. - Features refined body shape, quick-spin bit sleeves, longer bits, and bit-size indication. - Designed to stand up to the harsh conditions of professional use. - Pedro's popular Y-Wrenches feature heat-treated tool steel construction and durable plastic body designed to stand up to the harsh conditions of professional use. - The new improved ergonomic design features a refined body shape for improved fit and comfort, new quick-spin bit sleeves for speed and versatility, and bit-size indication for quick tool identification. - Backed by Pedro's lifetime warranty.

Three of the most common Torx compatible wrench sizes in our classic 3-way design. The TWS-3 is useful for disc rotor bolts (T25), chainring bolts (T30), and hydraulic brake work (T10). TWS-3 FEATURES - T10, T25 and T30 Torx compatible set - Wrenches made from industrial tool steel, through hardened and tempered for long life

- Classic chain breaker design with Key Chain pin adapter, and adjustable support screw. - For use with Odyssey's Key Chain, Bluebird, and all standard chains.

The Kool-Stop Tire Bead Jack is an articulated tool, with a comfortable grip, for installing really tight tires. The articulated end uses the rigid piece against the rim edge as a fulcrum while the hinged end lifts the bead up and over the opposite edge of the rim. This is a great tool for dealing with difficult tires.

- 1, 2, 2.5, 3, 4, 5, 6, 8mm Hex, T25 Torx, Phillips and Flat screw drivers - Textured sides for easy grip

- Evaporates fast and leaves no residue - A "no-scrub" cleaner that cleans to the base and prepares surfaces for application of high-performance lubricants - No water rinsing is required - Clean Streak's No-Rinse, No-Residue formula is perfect for use on disc brake rotors

Park Tool introduced the bicycle world to the 3-way hex wrench set over 30 years ago. Our 3-way wrenches fit perfectly in the palm of the hand and provide excellent leverage, making them a favorite of countless shop mechanics worldwide. AWS-1 FEATURES - 4mm, 5mm, and 6mm hex set - Wrenches made from industrial tool steel, through hardened and tempered for long life - Chamfered tips for a perfect fit

Many new bikes do not include pedals. Park Tool's DP-2 Threaded Dummy Pedal easily threads into the drive side to take the place of a pedal when making adjustments during the assembly of these bikes. Use of the DP-2 is much quicker than using a pedal wrench to install and remove an actual pedal during assembly.

- For installation or removal of pedals - Compatible with most pedal axles - Comfortable rubber coated handle improves grip - 15mm wrench size

Park's AWS-7 features a Y-shaped nylon handle with 4 and 5mm Allen wrenches and a T25 Torx wrench. This convenient 3-in-1 tool keeps commonly used wrenches together and offers an excellent grip as well.

Keep your drivetrain quiet while protecting your components with Squirt Dry Lube. This long-lasting wax and water-based lubricant is low maintenance and easy to apply: no degreasing is needed, just squirt it on and ride. Squirt is 100% biodegradable and doesn't contain harmful solvents. Plus, it works in all-conditions, wet or dry, for mountain and road.

- For use with majority of Hex bolts found on a bicycle - 2, 2.5, 3, 4, 5, 6mm Hex - Convienent storage carrier doubles as a handle

E-Bike Chain Wax uses the same proven and trusted, biodegradable wax/water emulsion technology as normal Squirt Chain Lube and is fortified with specialized high-pressure friction modifiers. - Slightly more slick than the original chain lube as this enables E-Bike Chain Wax to handle higher torque pressure and last longer in wet riding conditions than other wax based lubricants - Does not attract dirt or grime to your chain and no degreasing is required or recommended - 100% biodegradable

Finish Line® Dry Lube is the bicycle industry's original and most versatile dry-style chain lubricant. It is formulated with high-performing nano-ceramic boron nitride. This Non-Stick Ceramic Technology is 100% fluoro-free and sets up with a dry ‘wax-like’ film. It attracts less grime and delivers a low coefficient of friction over long re-lubrication intervals. It is ideal for riding on or off-road, in dry, dirty, dusty environments, and also holds up well in wet conditions. Designed for chain applications, it can also be used on derailleurs, shifters, cables, and brake pivot points. Dry Lube delivers optimum drivetrain efficiency without attracting excessive amounts of abrasive contaminants. • Formulated with Non-Stick Ceramic Technology • Lowers friction, improves pedaling efficiency, reduces wear • Quickly sets up dry and clean • Minimizes the attraction of abrasive contaminants • Low surface tension easily penetrates chain pins • Biodegradable and 100% fluoro-free

- Two sturdy tire levers also work as a chain master link tool to remove and install chains - Includes a chain hook to make installation and removal easy - Features a valve core tool as well as a place to store a spare quick link

Origin-8's Wood 8-In-1 Mini Tool features a plethora of tools with an excellent wood grip. It features a 2, 2.5, 3, 4, 5, and 6mm hex keys, Phillips and flat-head screwdrivers, and a T-25 Torx

Classic chain breaker design with Key Chain pin adapter, and adjustable support screw.

Shimano Genuine disc brake bleed Funnel unit for ST type Road brake lever (M7 thread bleed port) Features: - Oil spill guard lid with an integrated oil stopper holder - Funnel base - Bleeding instructions available for download under 'Documents & Links' below

The ultimate trailside companion. These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on. The m10 includes: Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 Screwdrivers: Phillips #2, flat #2 Torx: t-25 Length: 89 mm Weight: 124g Warranty: Lifetime

- For removal (and installation) of chain link pins - Compatible with 7, 8, 9, 10 and 11-speed chains - Comfortable rubber coated handle improves grip

- Fast and effective grease-cutting formula - Removes all chain oil and wax residue - Safely eliminates drive chain contaminants - Biodegradable - Ideal for use with chain cleaning devices - Trigger spray included for easy application on cassettes, chainrings and derailleurs - Safe for metal, plastic, rubber and seals

A favorite of shop mechanics for over 30 year's, Park's CCP-22 Crank Puller removes crankarms that feature square tapers, and those that fit on Power Drive and Power Spline bottom bracket interfaces. The long, comfortable, built-in handle and fine thread provide the leverage needed to remove even the tightest crankarms. And, there's a rotating tip to ensure smooth operation and long life.

The Park FR-6 Freewheel Remover fits most 4-notch BMX and singlespeed freewheels. It can be held with a wrench or vise and its narrow profile allows use without removal of cones and locknuts.

Lezyne's EXBBT-SOC is a shop quality, external bottom bracket tool constructed of durable, forged, and heat treated steel that's CNC machined for extremely accurate engagement. It is designed for use with Lezyne's 32mm CNC Rod (sold separately), an adjustable wrench, or a 3/8-inch socket driver. It is compatible with most external style bottom bracket cups.

Park Tool's professional-quality Snap Ring Pliers are made from forged, heat-treated cro-moly steel with a return spring and vinyl-dipped grips. The RP-2 has 1.3mm tips on bent nose blades for medium, internal snap rings. The tips of the RP-2 open from 22mm down to 2mm (center to center).

Park's Crank Puller is for removing crankarms on Shimano's splined, oversize, pipe-billet bottom brackets. It employs a long handle and a fine thread for the leverage and torque needed to remove tight arms. Park's unique rotating tip ensures smooth operation and long life. (The CCP-44 does not fit standard square or tapered bottom brackets.)

Park handles all of your screwdriver needs with their Shop Screwdriver Set that includes 3mm and 6mm regular, and #0 and #2 Phillips screwdrivers. They feature heat-treated chrome-vanadium tips and shafts for maximum durability plus dual-density grips for top control and comfort.

Available in 1/8? and 3/32? versions, the Interlock Pro Grade Chainbreakers are made specifically for the Shadow Interlock family of chains. The spacing is perfect for half-link chains and the included guide pin makes link alignment a breeze.

Everyone wears out their Park Tool work stand clamp covers at some point. Find replacement covers for yours here. Each cover is constructed of soft, durable composite rubber. See below to determine which covers fit your Park Tool stand clamp: - 1002: fits 100-3X and 100-5X extreme range clamps - 1185: fits clamps on the repair stands PCS-9, PCS-10, PCS-11, and PCS-12 - 1259: fits 100-4X, 100-6X, 100-7X, and 100-15X clamps - 1960: fits 100-3D, 100-5D, and 100-25D Professional Micro Adjust Repair Stand Clamps - 468B: fits clamps with double cable reliefs, including 100-3C, 100-5C, 100-8C, 100-8Y, and 100-9C clamps - 467B: fits clamps with single cable relief, including PRS-2 through PRS-8 (for older-style clamps, non-current) - 468G: fits PCS-1 and PCS-2 clamps with double cable reliefs (clamp models: 100-1C, 100-1CA, and 100-2C) - 467G: fits PCS-1 and PCS-2 clamps with single cable relief (for older PCS-series stands only; not for current model stands) - 466: Rubber Replacement Clamp Cover Set (fits older clamps with plastic-dipped jaws)

These shop-quality L-shaped hex wrenches have a genuine Bondhus balldriver tip on the long arm (excluding the 10mm) for hard-to-reach bolt heads and a straight tip on the short arm for high-torque applications. The HXS-1.2 includes a handy portable tool organizer/holder and it's hinged for easy access. • Includes 1.5, 2, 2.5, 3, 4, 5, 6, 8, and 10 mm sizes • Wrench tips are precision chamfered for a clean, tight fit • Made from industrial-quality Bondhus Protanium high torque steel

- Dark nickel plated finish - CNC machined arms - Hex keys: 2/3/4/5/6mm - Flathead and Phillips screwdrivers - T25 Torx

A good pedal wrench should be a pretty straightforward tool, and making it beautiful shouldn’t be overlooked – that’s definitely the case with our 15mm pedal and axle nut wrench combination tool. Two unique angled slots provide optimal mechanical advantage for removing even the most challenging pedals. At the opposite end is a precision closed 15mm axle nut tool that’s angled to provide ample clearance away from wheels. Made from forged, hardened and polished CRV tool steel, this is a one-time purchase, guaranteed. Available separate, or find it in our Team Edition and Ride Prep Tool Kits. - Forged, hardened CRV tool steel meant for a lifetime - Two different pedal flat angles for maximum leverage and efficiency - Angled 15mm axle nut wrench provides clearance away from wheels - Polished finish will look good for the life of the tool - Found in our Team Edition and Ride Prep Tool Kits

Specialized's MTB XC Box integrates with any SWAT compatible Specialized water bottle cage and SWAT-prepped mountain bike to hold all of the gear need to make fast trailside flat repairs. - Fits one Turbo 29er innertube, SWAT tire lever, CO2 twist head, and 25g CO2 cartridge (not included).

Serfas' Slimline mini-tool has everything you need for road and trail fixes in an incredibly compact package. It includes: 2, 2.5, 3, 4, 5, and 6mm Allen keys, a T25 Torx wrench, a spoke wrench and a chain tool. This compact, functional tool also tucks away Phillips and flathead screwdrivers between it's thin chrome body.