Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Stems

$40.99 - $60.99
Working on the design of the Odin Stem with Mark Burnett, we wanted it to really cater to the modern rider. Riders are going taller and taller with their handlebar heights so it was only appropriate to design a stem that would allow riders to sustain this taller handlebar preference. Mark Burnett also added to the design by requesting a shorter overall reach. Not only catering to his preference, but this also allows the stem to be much shorter and stout. Creating an overall stronger design. Taking these two details and encompassing them into an 11.5oz stem, we are confident that we are at the forefront of modern BMX feel and ride quality. Specs: Cold Forged & CNC Machined 6061-T6 Alloy Heat Treated 6mm solid hex bolts Reach: 48mm Rise: 36mm Stack Height: 29mm Width: 48mm Weight: 11.5oz.
$42.99
Why Choose between fashion or function when you can have both! The Rose Stem features a shorter 48mm reach and a tall 36mm rise. This puts your bars up for more pop, but won’t have you stretched out too far over the front end. The cold forged process allows us to keep cost way down, and allows us to create the unique bold Subrosa branding on the sides of the stem. Bolt it all together with heat-treated oversized bolts that wont break and will keep your bars from slipping.
$49.99
The Haze V2 top load is made from forged alloy and features a CNC machined stranger logo on the side. Reach: 50mm Rise: 30mm Once got 12 retweets Weight: 10.8oz
$99.99
- Highly weight optimized single crown stem for use with 35mm handlebars - Dial your fit with micro increment size options, tuned to fit any rider size and style - Cockpit setup index lasered onto stem helps with tuning of upsweep and backsweep - Ultra-short stack height and true zero-degree rise - Chamfered bar clamp to reduce stress risers and increase fatigue life in handlebars - Recommended for: ASTM 5, All mountain, enduro, trail, free ride, E-Bike Specs: - Key Technologies: MGR Alloy, chamfered bar clamp, top-cap included - Material: 6-Series Alloy, 3D forged CNC optimized body - Rise (°): 0 - Diameter: 35mm - Stack height: 34mm - Weight: ±131g (35mm) / ±136g (40mm) ±139g (45mm) ±141g (50mm) - Finish: Shotpeen anodized
$59.99 - $69.99
- Strong yet competitively lightweight alloy single crown stem for all disciplines - Unique style, modern geometry, and rock-solid construction, without the heavy price tag - Dial your fit with micro-increment size options, tuned to fit any rider size and style - Cockpit setup index lasered onto stem helps with tuning of upsweep and backsweep - Ultra-short stack height and true zero-degree rise - Chamfered bar clamp to reduce stress risers and increase fatigue life in handlebars - Recommended for: ASTM 5, All mountain, enduro, trail, free ride, DJ, E-Bike
$74.98
MARK MULVILLE PUSH STEM -The “Push” stem is named after Mark’s favorite trails. -Locates bars 23mm (.9 inches) higher than the Acoustic Stem. Sizes: 48mm, 53mm, 58mm, 63mm Reach: 53mm Stack Height: 33mm Rise: 31.7mm (Upright) / 1.3mm (Invert) Clamp bolts: 5/16?x18tpi (x4) Pinch Bolts: 5/16?x18tpi (x2) Weight: with chromo bolts: 297g/10.45oz with titanium bolts: 267g/9.45oz
$69.99
Tom Dugan's signature DGN v2 stem is a classic top-load, 6-bolt design. Along with other Odyssey v2 stems, the bolt heads have been upgraded to a larger size and the clamping area features unique surface contouring for superior handlebar grip - Six bolt clamping configuration - Headset pre-load bolt recess (32mm diameter)
$69.99
Updated version of our trusty top load stem. Same clean design details and strength as the original, now with a 30mm rise. CNC’d 6061 aluminum with a 50mm reach. Weight: 11.1 oz.
$26.99 - $29.99
Balancing design, materials, and manufacturing techniques allow the Kink Bold HRD to truly be a solid and affordable stem. The die-cast aluminum body is paired with a forged 6061-T6 aluminum cap, providing additional strength. A counterbore in the stem body allows the fork cap bolt to thread down flush for a clean look. The classic 50mm reach comes with a comfortable 32mm rise and a traditional 6-bolt system. Chamfered edges and radiused corners give the stem a clean look and knee-friendly design. TECH SPECS - Reach: 50mm - Rise: 32mm - Stack Height: 30mm - Material: Aluminum Body and Forged Aluminum Cap - Bolts: Solid w/ 6mm Allen Hex - Weight: 10.7oz
$59.95
The legendary BF stem is back! At just over 28MM tall it’s in the middle of our Aitken and High-Top stems. With two lengths to choose from with a classic look that doesn’t sacrifice strength with any unnecessary machining. Made in USA. Reach 48mm, 51mm Rise 28.66mm (upright), 2.84mm (inverted) Material 6061-T6 Aluminum Weight 9.9 oz (280 g), 11.1 oz (315 g)
$59.99
The Element stem is made using cold forged process which keeps the strength up at a more affordable price.
$45.99
- Forged alloy construction - Adjusts from 0 to +/- 60° - 31.8mm, shims included to fit 25.4mm handlebar
$35.99
- 3D forged alloy construction - Fits 1-1/8-inch (28.6mm) steerer forks - Fits 25.4mm handlebar clamp - M6 Black hardware - Weight: 161g (110mm)
$29.99 - $39.00
Dimension 31.8 Stems are fully forged 6061-T6 aluminum stems that have a 4-bolt handlebar clamp. - 31.8mm can be used with 26.0 bars with additional shim (SM5317) - Dimension stems are not intended for use with carbon handlebars or carbon steer tubes - Weight: 130g-180g
$59.99
Markit X Demolition V2 Limited stem Recessed for ø32 mm Bolt Width:45mm Reach: 53mm Stack Height: 33mm Rise: 32mm (upright) Weight: 10.8 oz
$50.00
Features: Team Stem Reach: 50mm Stack Height: 32mm Rise: 21mm (upright) Recessed for ø32 mm Bolt Weight: 11.1 oz
$94.99 - $104.99
Inspired by the sleek and deadly lines of a Copperhead snake, the sweeping center channels of the Copperhead stem wrap around the entire stem to minimize material while delivering the a stong steerer mounted stem. DEITY's focus on durability and dedication to the symmetry between strength and weight is showcased in the balance of style and function that is the Copperhead stem. - Designed for all applications from All MTN to Slopestyle and anything in between - CNC Machined from a solid block of 6061 T6 Aluminum - Exceptionally detailed chamfered edges and channels throughout - 55mm wide clamping platform
$86.99
STEMS / SQUAREBACK STEM The Colony Square Back Stem is the choice of most the team and plenty of riders around the world. Also a fairly large rise helping you get a taller front end feel. Full CNC machined from 7075T6 alloy. Stronger & lighter than 6061T6 stems. Higher Top load 6 bolt system. 50mm reach, 33mm Rise. Removable gyro plate available separately which fits all Colony stems. Weight: 292 grams (10.2oz)
$54.99
The Martinez stem is inspired by classic-looking top-load stems with key improvements in strength and geometry. A 48mm reach gives a responsive feel while the standard 22mm rise can be reduced to just 8mm by inverting the stem. Six oversized Allen key bolts provide plenty of strength and torque and give the stem a classic well-balanced look and feel. Beveled edges and the tapered body profile give the stem a classic yet unique look. Corey Martinez tested and approved. - Reach: 48mm - Rise: 22mm (8mm Inverted) - Stack Height: 30mm - Material: 6061-T6 Aluminum - Bolts: Solid Oversized w/6mm Allen Hex - Weight: 10.9 oz
$64.99
* Wider and beefier than the OG Salvation stem * * 6061 aluminum * * solid bolts * * improved clamping area * * recessed compression bolt for a clean look * Now available in TWO different sizes.... 51mm reach / 32mm rise 46mm reach / 32mm rise
$44.99
Top Load BMX stem from Animal. The Highline stem from Animal is made from Forged 6061 Aluminum Construction. TYPE: Top Load REACH: 50mm RISE: 35mm CLAMPING DIAMETER: 22.2mm
$369.99
Get back on the road with a genuine replacement stem. Original equipment replacement stem for your Madone SLR. PRODUCT DETAILS - High fit stem is 7-degrees of drop - Not compatible with other bikes - For installation instructions, please see your Madone Assembly Manual
$50.00
Specialized's Comp Multi Stem is forged and machined from 6061 aluminum for stiff, responsive handling. The 6-degree rise puts your bars in a position for improved control and the 31.8mm handlebar clamp is compatible with composite and aluminum handlebars.
$60.00
3D-forged and CNC-machined from 6061 aluminum the Future Stem Comp is optimized for use with all Future Shocks. It's also compatible with our Specialized accessory mount for seamless integration. - 3D-forged and CNC-machined, 6061 aluminum, Future Shock-optimized stem. - Available in 6-degree angles and 60, 70, 80, 90, 100, 110, and 120mm lengths. - Compatible with the Specialized accessory mount.
$125.00
The Alpinist Stem is a light and stiff alloy stem. Designed to perform during big attacks in the hills and furious bunch sprints, while weighing just 110g for featherweight performance when the road goes up. With classic lines, traditional clamp, and huge range of lengths and rise angles, this stem earns the Alpinist name as the ideal upgrade to almost any bike. LIGHT: Every Alpinist product puts a premium on lightweight, because we know lightweight is a key ingredient to creating magical ride quality. Using premium 7075 Alloy and Ti hardware, the Alpinist stem weighs a feathery 110grams in a 110mm length. STIFF: 3D Forged and CNC machined, despite its feathery weight the Alpinist stem delivers the stiffness needed for big power and precise, sharp handling in the most challenging situations. FIT: With seven lengths to choose from, and three different angles of rise, you know you'll find your perfect fit with the Alpinist Stem. Its classic lines, polished black finish, and traditional 31.8mm clamp make it an aesthetic fit with almost any bike. - Material: 3D-forged and CNC-machined, 7075 aluminum - Bolts: Titanium - Lengths: 70, 80, 90, 100, 110, 120, 130mm - Rise: 6, 12, or 17-degree rise - Weight: 110-115g (for 110mm) - Clamp Diameter: 31.8mm - Clamp Height: 40mm - Steerer Tube: 1-1/8"
$125.00
The Control Stem is tailor-made with a 35mm clamp to partner with the Control SL bar, delivering more stiffness and more control—coming in at an incredibly light 100g (50mm). Turns out, you can have it all. LIGHT: Where light weight and stiffness meet. Its high-quality 7075 Alloy and Ti hardware and featherweight function make the Control SL Stem a perfect match for race-day setups. STIFF: Made with the same integrity as the suite of stiff Roval components, the Control SL provides race-ready rigidity allowing for precision on the bike. FIT: With six lengths to choose from and 6 degrees of rise, you know you'll find your perfect fit. - Material: 3D-forged and CNC-machined, 7075 aluminum - Bolts: Titanium - Length: 50mm, 60mm, 70mm, 80mm, 90mm, 100mm - Rise: 6 degree rise - Weight: 100g (at 50mm), 130g (at 100mm) - Clamp Diameter: 35mm - Clamp Height: 40mm - Steerer Tube: 1-1/8"
$125.00
Making its debut on the all-new Roubaix the S-Works Future stem is the stiff lightweight upgrade that your Roubaix has been waiting for. It's compatible with all Future Shocks and our Specialized accessory mount and its sleek design will create a seamless integration. - Sleek & seamless integration with all Future Shocks. - Supremely stiff for responsive handling and feel. - Compatible with the Specialized accesory mount. - 6-degree rise - Length options: 70-140mm - Approximate weight: 145g (100mm)
$79.99 $125.00 36% Off
Specialized's S-Works SL Stem is sleek and lightweight. - 3D-forged and CNC-machined, 7075 aluminum road stem . - Includes expander plug for carbon steerer tubes and titanium hardware.
$125.00
Lean and clean. The lightweight and stiff S-Works Tarmac Stem features integrated cable routing for Tarmac SL7 models to clean up the cockpit without complicating the bike build. - Compatible with Tarmac integrated cockpit. - Integrated face-plate computer mount. - 80-140mm length options. - 6 and 12 degree rise options. - Approx. weight: 155g (100mm)
$79.95 $150.00 47% Off
The S-Works Venge stem has been designed to work as a system with the Venge cockpit to optimize aerodynamics, stiffness, and weight. - Seamless integration with the 2019 Venge frame and hidden cables - Optimized for use with the S-Works Aerofly II handlebars for integration - Its dropped clamp and flat upper profile cheat the wind for the maximum aero advantage - Extremely stiff for responsive handling and out of the saddle sprinting
Page 1 of 2 Next page