BMX

The S&M Slidepipe V2 is a heavy-duty, portable BMX rail designed and built to withstand the rigors of even the heaviest street riders. Oversized, steel bases and commercial-grade, rubber feet keep the rail firmly in place while uprights made from square, steel tubing won’t allow bases to twist, even without hardware! The super-strong, extruded, center connector has a thick spine featuring tapped threads that won’t pull out, plus a reinforcement plate that spans all four connecter bolts for added strength. According to Charlie Crumlish, the Slidepipe is, “Rock F’n solid!” • 8’ long by 18” tall assembled • Oversized 12mm thick steel bases • Commercial-grade, molded rubber feet with Shield logos • Extruded center connector with tapped threads • High quality 6mm button head screws and 17mm lock nuts • Plastic end caps with Shield logos • “Rock F’n Solid” • 62 lbs

The Primo Pro HD Fork features the same geometry as the popular Strand fork with new durable invest cast technology. The super steep 13mm offset matched with the proven Pro fork dropout shape pair for an unmatched steering angle.

Made from revised 100% Cult Classic tubing for increased strength and then 100% post-weld heat treated. Investment cast 1pc drop outs for maximum strength and a super sleek finish with a 28mm offset or a steep 18mm offset. 32mm offset fork features welded heat treated dropouts not investment cast dropouts... 1-pc machined steerer tube with an integrated bearing race, tapered legs, and tire clearance for 2.40” tires. LIFETIME WARRANTY

Introducing the Subrosa Rose Cranks. Post Weld Heat treated chromoly, with CNC’d spindle bosses, all held together with oversized welds. Slim design with a 19mm spindle to keep it simple with 6mm allen bolts. BB is included!

The Clutch Hub is a traditional clutch-based coaster hub design that eliminates all of the problematic elements on ordinary hubs and only keeps the parts that work. A new, super-strong FULL 14mm axle, bearing configuration, and drag mechanism design stops the need for constant repairs. Equipped with external slack adjustment, which can be done with a 2.5mm hex key through a hub shell access hole (can be adjusted without removing the wheel), and an improved plastic hub guard spec. Same Clutch coaster hub you’ve come to love, but with a few upgrades. Features: - Maximum strength axle design - Super-durable bearing arrangement throughout - 2.5mm hex key slack adjustment through hub shell access hole. No wheel removal required. - Super-durable drag mechanism design - Crankflip ready Improvements Over the Clutch V1: - 14mm chromoly axle bolts on both the drive and non-drive side for greater reliability - Improved clutch engagement - Improved manufacturing precision throughout - More slack than the V1 hub - All-new durable proprietary plastic spec for the removable hub guard Specs: - 36-hole, 2014-T6 aluminum shell - 9T Driver - Left or right hand drive - 22 oz / 623g Guard Options: - Plastic hub guard included (but optional to use) - Alloy hub guard also available

The Federal Vice crank features a unique radius box section combined with a 24mm hollow 48 splined spindle to make these some of the strongest and stiffest bmx cranks on the market. The spindle and arms are both made from heat treated 4130 Chromoly and the spindle has been internally machined to reduce weight. The cranks are designed to take all the abuse of the modern street rider and the angular shape of the arms helps to make crank slides more stable. The braised logo gives the cranks a unique and distinct appearance.

FORKS, NEW PRODUCTS / SWEET TOOTH FORKS The Alex Hiam signature Sweet Tooth forks now come in three different offset sizes, 20mm more for technical riding, 25mm suited for all round riding and 30mm for going fast, trails and big bowls. Full 4130 CrMo post heat treated fork. One piece CNC steer tube with M24x1.5MM fork top cap. Tapered multi-butted legs. 5mm CNC heat treated drop outs with weight saving machining. 20mm, 25mm & 30mm off sets available. The Colony Sweet Tooth forks come in either Gloss Black, ED Black or Chrome. 165mm steer tube length. Weight: 944 grams w/o top cap. (top cap 19 grams).

NEW STRONGER AND WIDER MATCH V2 RIM... All new design... Black CREW Front hub laced to a Black Match Rim… Comes with 2 Hubguards...

PRODUCT DESCRIPTION The new street fork from Animal. The street fork has been designed with modern day street riding in mind with 2 different offsets to pick from depending on your style of riding. The street fork also features investment cast dropouts for added strength.

We’ve taken The Rant Party On Cassette Wheel and made it more reliable with more function at the same great price. The Party On V2 now includes 5 sealed bearings – 2 in the hub shell, 3 in the driver.The traditional style 4 pawl single spring driver makes engagement loud and strong. High end details like a 14mm broached axle, 17mm axle nuts and cones that accept the Party On plastic guard make it tech. Built up with 14G spokes and double wall Rant Squad rim, this wheel can take what you give it

A true bmx classic. The Hazard Lite is respected because of its strength, reliability and light weight. Often imitated but never matched in quality or durability. The Hazard Lite is the rim of choice for some of the world’s best riders. - Fully welded joint construction - Directional spoke hole drilling

The new Rant Party On V2 Front Wheel now has an improved flatter and wider front hub with cones that are designed to accept the new slide on plastic Party Guards. Spec’d with smooth rolling sealed bearings, tough double wall Rant Squad rim and 14 gauge spokes. This wheel makes a great replacement or upgrade.

The Ribcage has been one of the only rims to have true design breakthroughs in the last few years, since its introduction the competition has scrambled to catch up but still remain a poor copy, so if it doesnt say G-Sport on the rim, don't expect it to perform like a G-Sport rim. The Ribcage is a light weight rim that can take anything you throw at it. With the ribcage the spoke holes are re-enforced with patented ribs that support the sides of each spoke nipple and eliminate the possibility of nipple pull through under even the highest loads. The rim also features cross-over-spoke lacing, where each spoke goes from one side of the hub to the opposite side of the rim for an increased angle and therefore increased lateral strength. The outer walls are extra thick to protect against case dents, while the other walls are extra thin to keep it light. The entire design revolves around the use of a proprietary high strength aluminum alloy made specially for us in an on-site foundry . At 500 grams, the strength to weight ratio of the Ribcage cannot be matched. The 36mm width and 18mm height are also major factors in the design, spreading out the impacts and maximizing resistance to pinch puncturing. GSport offers rims in HARD anodized finishes rather than the decorative anodizing used by most companies. All of these advantages create the premier rim, but do effect the cost. TECHNICAL SPECIFICATIONS - Sizes: 20" Only - Drillings: 36 and 48 - Weight (Hard Anodised): 500g /17.6oz - Weight (Chrome Plate): 540g / 19oz - Width: 36mm ERD: 389

If the Ribcage is too rich for your blood, the Rollcage is its more affordable sibling. Using the same proven shape and cross-over-lacing to create a really strong wheel, but industry standard 6061-T6 alloy and no ribs drops the price considerably. While the Rollcage is the lesser expensive, it is still an excellent rim, with the same super tough sidewall and bead profile its the lightest rim we make at 450 grams. You will recognize the rims by their outer shape, but the Rollcage is actually 2mm narrower and easily identified by the groove in the middle of the inner wall. We offer rims in HARD anodized finishes rather than the decorative anodizing used by most companies. TECHNICAL SPECIFICATIONS - Sizes: 20" Only - Drillings: 36 and 48 - Weight (Hard Anodised): 450g / 15.9oz - Weight (Chrome Plate): 490g / 17.3oz - Width: 34mm ERD: 389mm

The Definitive Front Hub features a low flange, low profile 6061 -T6 alloy hub shell with printed logos, precision sealed bearings and 7075 hardware spinning on a 14mm hollow female axle with extra- long bolts for durability. The Definitive Front hub is compatible with Shadow plastic hub guards (sold separately).

STEMS / SQUAREBACK STEM The Colony Square Back Stem is the choice of most the team and plenty of riders around the world. Also a fairly large rise helping you get a taller front end feel. Full CNC machined from 7075T6 alloy. Stronger & lighter than 6061T6 stems. Higher Top load 6 bolt system. 50mm reach, 33mm Rise. Removable gyro plate available separately which fits all Colony stems. Weight: 292 grams (10.2oz)

The Grime Bar is Denim Cox’s signature handlebar, this is BSD's first 4 piece bar and is available in 2 heights. Constructed from heat-treated multiple butted 4130 chromoly. Heavyweight street aesthetic without being heavy weight... Rise 9 or 9.5" Width 29" Upsweep 2° Backsweep 11° Clamp Size regular 7/8" or 1" OS Weight 1.8lbs

* Made from 100% heat treated butted chromoly * * Classic feel good geometry * * Three sizes available * 30" width, 12° backsweep, 2° upsweep 9" / 9.35" / 9.65" rise ** black & chrome **

David Grant signature Raider handlebars from BSD. The Raider bars feature a massive 10" rise and are made from multi-butted post weld heat treated 4130 for maximum strength to weight ratio. Available in regular 7/8? or new ‘OS’ 1? clamp options.

The real deal, the Reel full guard sprocket. CNC machined from super thick 7075-T6 aluminum, the Reel sprocket will hold up to sprocket chunks and crank arm grinds while protecting your chain at the same time. Extensive machining not only reduces the weight but adds plenty of crank arm clearance.

Features: Rise: 9.25?, 9.5? Width: 28? Backsweep: 12° Upsweep: 1° Crossbar OD: 0.75? Crossbar Height: 7.1? Crossbar Width: 11? Material: Chromoly Weight: 34.1 oz (9.25?)

Features: Rise: 9?, 9.25?, 9.5?, 10? Width: 29? Backsweep: 12° Upsweep: 2° Material: 4130 heat treated Weight: 33.2 oz (9?)

Features: Kevin Peraza Signature Bar Rise: 9? , 9.25?, 9.5? or 10? Width: 29? Backsweep: 12° Upsweep: 2° Crossbar OD: .75? Crossbar Height: 6.5? (9?) & 6.75? (9.25?) Crossbar Width: 11.28? (9?) & 11.3? (9.25?) Material: 13 butted, heat treated CRMO. Thickest point is 1.8t (.070) Weight: 33.2 oz (9?)

Our Andre bars are multi-butted heat-treated 4130 chromoly and are available in 9.25" X 29.25" and 9.75" X 29.5" both have 12° of backsweep and 2° of upsweep. Weight: 32.1 oz.

9.2" Rise 29." Wide 3* Up 12* Back - Multi butted & Heat treated - 100% 4130 Chromoly

Classic big box shape two-piece bar made from 100% heat-treated straight-gauge Chromoly. Designed in collaboration with ISM cycling. - 2° Upsweep - 11° Backsweep - 29" wide - Sicker than sars - Higher than mars

Straight gauge heat treated 4130 cr-mo

FEATURED: Sealed front hub w/ Chromoly 3/8” axle Hand laced to a Rampage double-wall rim (PVC rim strip included) AXLE: 3/8" chromoly (Heat-treated) HARDWARE: Steel (17mm wheel nuts) HUB SHELL BEARINGS: 6000 (x2) Verify bearing number on side of rubber seal SPOKES: 187mm (3X) Black w/ Black Brass nipples DRILLING: 36h only COLORS: Anodized Black, Polished & Limited Edition Colors WEIGHT: 32.5 oz. (20")

MARK MULVILLE PUSH STEM -The “Push” stem is named after Mark’s favorite trails. -Locates bars 23mm (.9 inches) higher than the Acoustic Stem. Sizes: 48mm, 53mm, 58mm, 63mm Reach: 53mm Stack Height: 33mm Rise: 31.7mm (Upright) / 1.3mm (Invert) Clamp bolts: 5/16?x18tpi (x4) Pinch Bolts: 5/16?x18tpi (x2) Weight: with chromo bolts: 297g/10.45oz with titanium bolts: 267g/9.45oz