Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

24-Inch & Smaller

$244.99
The Shadow Symbol Cassette wheel pairs the value and reliability of our Shadow Symbol cassette with the rigidity and strength of our Shadow Truss rim to create an unbeatable combination. Including a replaceable plastic non drive side hub guard and laced 3 cross to the wider, 38mm Truss rim, this wheel is ready for action without any extra consideration.
$74.99
FEATURED: Sealed front hub w/ Chromoly 3/8” axle Hand laced to a Rampage double-wall rim (PVC rim strip included) AXLE: 3/8" chromoly (Heat-treated) HARDWARE: Steel (17mm wheel nuts) HUB SHELL BEARINGS: 6000 (x2) Verify bearing number on side of rubber seal SPOKES: 187mm (3X) Black w/ Black Brass nipples DRILLING: 36h only COLORS: Anodized Black, Polished & Limited Edition Colors WEIGHT: 32.5 oz. (20")
$302.99 - $343.99
Freemix freecoaster hub laced to the Balance V2 rim. • Dual nylon hub guards • 9t driver
$329.99
Hazard Lite Cassette Wheel Black This Hazard Lite Cassette Rear Wheel features the Antigram v2 Cassette Hub laced to the tried and true Hazard Lite Rim. Antigram v2 Cassette Hub 2014-T6 forged aluminum hub shell 6903RS sealed cartridge ball bearings 14mm, 4130 chromoly axle bolts w/17mm 4130 chromoly female axle 9t driver with 3-Pawl independent springs design and precision caged needle bearings RHD/LHD switchable Replaceable plastic hub guard included Hazard Lite Rim 6000 series aluminum 32mm wide 17mm tall 390 ERD 36-H
$229.99
Quadrant Cassette Wheel Black Odyssey's Quadrant Front Wheel features the C5 Front Hub laced to the Quadrant Rim. C5 Cassette Hub 36-H, 6061 T-6 aluminum hub shell 14mm, 4130 chromoly hollow axle, w/6mm hex broaching 9T driver with 3-Pawl independent spring design RHD/LHD switchable Removable plastic hub guards (compatible with Odyssey/G-Sport hubs) 6802 sealed cartridge driver bearings (3) 6903 sealed cartridge hub shell bearings (2) Quadrant Rim Lightweight and affordable Unique pinned junction Directional spoke hole drilling 36-H
$159.99
Quadrant Front Wheel Black Odyssey's Quadrant Front Wheel features the C5 Front Hub laced to the Quadrant Rim. C5 Front Hub 36-H, 6061 T-6 aluminum hub shell 6902 sealed cartridge bearings 15mm 4130 chromoly female axle 3/8" heat-treated chromoly axle bolts w/17mm wrench flats and 6mm hex slots Replaceable plastic hub guards (compatible with Odyssey/G-Sport hubs) Quadrant Rim Lightweight and affordable Unique pinned junction Directional spoke hole drilling 36-H
$129.99
The Mission Engage rear cassette wheel is a fully sealed hub, 3-cross laced to the rugged Mission Mylar double wall rim. Heat-treated chromoly axle, 5 precision sealed bearings, and stainless-steel spokes make the Engage wheel a solid ride. - Hub: Mission Engage Cassette - Rim: Mission Mylar - Weight: 46.1oz
$189.99
Our super strong Battle rim laced to our Non stop front hub. Weight 25oz
$299.99
Non-Stop Cassette hub laced to our Siege rim. Available in RHD or LHD
$149.99 - $169.99
The ZX 333 rear wheel is the most affordable wheel in our line. Featuring a double-wall pinned 333 rim laced to a fully sealed cassette with 14mm male axles and 9T driver. All Cinema wheels come with a Cinema rim strip and Cinema hub guards! - Hub: Cinema ZX Cassette - Driver: 9 Tooth - Rim: Cinema 333 - Spokes: 36 stainless steel - Weight: 3 lbs 1 oz
$259.99
NEW STRONGER AND WIDER MATCH V2 RIM... All new design... Black CREW CASSETTE hub laced to a Black Match Rim… CREW CASSETTE wheel features the new SDS 9t cassette hub built onto a new Cult Match v2 rim using forged spokes... Comes with non drive side hub guard... Flip Flop design. Hub can be converted from RHD to LHD...
$149.99
NEW STRONGER AND WIDER MATCH V2 RIM... All new design... Black CREW Front hub laced to a Black Match Rim… Comes with 2 Hubguards...
$189.99
Pairing the amazing Shadow Symbol front hub with the impressive Shadow Truss rim to create an unmatched combination. A set it and forget option for those who seek quality, value, and strength in a complete front wheel. Summed up in one word…. Integrity.
$229.99
Tall Order Dynamics Front Wheel - Black Hub With Chrome Rim The new Air rims are laced in a 3 cross configuration using double butted spokes on to a Glide front hub for one of the strongest and lightest wheels available. These are Chrome rims laced onto black hubs using Black spokes. - Branded rim tape included - Ready to go out of the box The Air rim features: Custom extruded triple box section profile 33mm wide x 19.4mm deep rim (11mm Sidewall) Aluminium 6066-T6 material Increased wall thickness around spoke holes Flash welded seam joint Centralised spoke layout for increased spoke angle Internally drilled to reduce weight V-shaped internal rim bed for easier tyre installation or removal Larger flattened bead profile to resist dents and reduce pinch flats Large corner radius to reduce hang ups during grinds Box section walls are continuous with no cut-outs to maintain strength around the entire rim Weight: 2lbs 3.5oz
$365.99
Tall Order Dynamics RHD Casette Wheel - Black With Chrome Rim And Silver Nipples 9 Tooth PLEASE NOTE: This wheel is built using Chrome spoke nipples The new Air rims are laced in a 3 cross configuration using double butted spokes on to a Drone cassette hub for one of the strongest and lightest wheels available. These are Chrome rims laced onto black hubs using Black spokes. We were very specific about having a cassette with super fast engagement. The end result is a hub that has 3 individually sprung pawls with 150 points of contact which creates an almost instant engagement when you start to pedal as well as being one of the most unique sounding cassettes on the market. So if anyone is running a ‘tall order’ cassette you will instantly be able to recognise it from the unique sound alone. The hub also has a chrome driver and laser etched logo to complete the look. This hub is available with a 17mm female axle and 14mm bolts. - Branded rim tape included - Ready to go out of the box The Air rim features: Custom extruded triple box section profile 33mm wide x 19.4mm deep rim (11mm Sidewall) Aluminium 6066-T6 material Increased wall thickness around spoke holes Flash welded seam joint Centralised spoke layout for increased spoke angle Internally drilled to reduce weight V-shaped internal rim bed for easier tyre installation or removal Larger flattened bead profile to resist dents and reduce pinch flats Large corner radius to reduce hang ups during grinds Box section walls are continuous with no cut-outs to maintain strength around the entire rim Weight: 2lbs 10.6oz
$99.99
The new Rant Party On V2 Front Wheel now has an improved flatter and wider front hub with cones that are designed to accept the new slide on plastic Party Guards. Spec’d with smooth rolling sealed bearings, tough double wall Rant Squad rim and 14 gauge spokes. This wheel makes a great replacement or upgrade.
$139.99
We’ve taken The Rant Party On Cassette Wheel and made it more reliable with more function at the same great price. The Party On V2 now includes 5 sealed bearings – 2 in the hub shell, 3 in the driver.The traditional style 4 pawl single spring driver makes engagement loud and strong. High end details like a 14mm broached axle, 17mm axle nuts and cones that accept the Party On plastic guard make it tech. Built up with 14G spokes and double wall Rant Squad rim, this wheel can take what you give it
$354.99
Roloway Cassette Hub This RHD/LHD compatible hub features a modern slim shape along with all the durability you've come to expect from a GSport hub. Features 7075-T6 aluminum hub shell Super durable and smooth 16003 sealed cartridge hub shell bearings 14mm 4130 chromoly axle bolts w/17mm 4130 chromoly female axle 9T driver with 3-Pawl independent spring design and precision caged needle bearings RHD/LHD switchable Replaceable plastic hub guard included
$249.99
If you take GSport Ribcage Rim and lace it to the GSport Roloway Front Hub, you’ll end up with one of the strongest front wheels you can get. Matches GSport's Elite FC and Elite CSST rear wheels. Comes stock with GSport High Pressure Rim Strips. Roloway Front Hub The new Roloway hub is a precision sealed front hub with 3/8” in-bound axle bolts and two plastic hub guards. An oversized axle, bearing configuration and 7075-T6 aluminum hub shell is used for unmatched durability.
$184.99
The low flange Javalin front hub from Animal features a CNCd 7075 aluminium shell with heat treated Crmo female axle. The Javalin hub also has a steel bearing contact on the cone spacers to eliminate any binding over time. The Javelin is laced to the 7005 aluminum Animal RS rim with welded seam, sidewalls have a short vertical section enough for a braking surface, then an angled portion, spoke holes are also drilled for traditional lacing.
$269.99
The Javelin cassette features a CNC machined 7075 aluminium shell, a 1 piece 9T driver with Polymer Bushings and a heat treated Crmo 14mm hollow axle with colour matched wheel nuts. The Javelin is laced to the 7005 aluminum Animal RS rim with welded seam, sidewalls have a short vertical section enough for a braking surface, then an angled portion, spoke holes are also drilled for traditional lacing.
Page 1 of 1